DN15 Integrated Circuit Valve

DN15 Integrated Circuit Valve

The DN15 electric automated valve controls are excellent methods to prevent water leakages from reaching any faucet or basin that is connected to the house.dn15 electric automated valve They are basically electronic and require a monitoring system to monitor any type of malfunction. These valves have had to undergo an extensive change in the construction process from those of the past to what they are today.

These newer models can be quite complex, which is why they take the additional effort to install. The ability to monitor the valves via remote control has made these pieces of equipment even more useful. There are now two major types of the DN15 electric valve.

One is the black box that is placed in the sink. The other is the handheld model that can be moved by a person when needed. Both kinds of these pieces of equipment have a sensor that uses electric current to move the valves through its controlled movement.

The DN15 integrated circuit is required to operate this piece of equipment. The circuits are placed into the valve and then they send information to the monitoring unit via radio waves. The circuits also require the remote access terminals to be installed in the home so that a person can make any repairs to the equipment themselves.

The types of systems required for this kind of equipment have changed as well. A person cannot install the newer DN15 integrated circuit equipment if they did not already have the older version installed in their home. The newer system can also be called as DN15-II, since it is similar to the older ones.

There are other types of automated valve control that operate on automatic valve release systems. They do not have the control circuitry that is needed to operate this piece of equipment. These types of pieces of equipment can have the option of monitoring acertain point in a residence or office and automatically adjusting the valves when a valve near the monitored point is left open for longer than the specified time.

The DN15 integrated circuit can also be used to control a home's existing water supply as well. When the DN15 electric automated valve senses water leaks, it will send a signal to the system to shut down the leak and then will send out a signal that the valve is closing. The sensors will be triggered by the release of steam or a flame coming from the source of the water.

Some of the DN15 integrated circuit valves come with a sensor that can sense water leaks as well. The type of sensor that is installed will be made by different companies. There are different models available for every kind of water leak detection.

Tags:dn10 miniature electric ball valve