How to Use an Actuated Ball Valve

How to Use an Actuated Ball Valve

The actuated ball valve is an expensive, but very useful device. You can find this type of valve in many shapes and sizes, so you can choose the perfect one for your applications. Its most common use is in water softening. You will want to learn how to properly operate this device, because it is very complex and can malfunction if you are not careful.

One of the most important things to know about these balls is that they must be fully seated in the water before they will open. This way, there will be no chance of a leakage or a clog. Once you turn the valve on, the ball moves around in the water, and when it comes to set it into the water, the valve must be in the same place. You can learn how to properly use this device by watching some videos. However, if you want to learn how to use this device for yourself, then here are a few easy steps that you should follow.

The first thing that you will need to do is to turn the valve on and then to add some water to the tank. Be sure that you do not put in more water than what the valve is designed to handle. Once you have the water full, you will be able to open the valve.

When you are ready to put the ball into the water, make sure that you go slowly and carefully. Once you have it in place, tighten the nut that is located at the top of the valve. If you are not able to seal the nut, you could cause a leakage or a clog.

After the valve is closed, you can remove the ball and turn it. If you feel that the ball has already set in the water, you can turn the valve off. You should now use a sponge to clean out any particles that are still floating in the water. This process can take quite a while, so you will need to plan ahead and bring several sponges with you.

The next step to cleaning the sponge is to let it dry before you can do anything else. When you are done, you will need to wipe the sponge with a paper towel, and you should not forget to use a soft cloth to avoid scratching the ball. This process will take a little bit of time, but it will be worth it when you have cleaned out the dirt and debris. Once you have finished cleaning, you will need to put the sponge back on the valve.

The last step to using the actuated ball valve is to turn it back on. Make sure that you watch the clock carefully, as it might take some time for the valve to set in the water. It should start out slowly, and then you should turn it up so that it can finish putting the ball in the water. Once you have completed setting the valve, you will be able to see the results in just a few seconds.

Follow these simple steps to properly use this ball valve. Although, it is very important to remember that it can malfunction, especially if you do not follow these instructions correctly. You will not be able to clean the dirt out with a sponge, so you will need to use a cleaning tool to remove it.

Tags:electric motorized ball valve used for sea water | dn8 electric ball valve